Dear readers! It seems that there are too many changes in CubeMX for this tutorial to work. Please do not follow it! I will soon make a new tutorial on this. Once I get some info back from ST. Thank you! Slemi In this series of articles I will show you […]
It is time to use some alternate functions on ports pins. For this example we will use alternate function of PORTA.2 and PORTA.3 to serve as RX/TX of USART2.
In previous posts I wrote about blinking LED and configuring ports. Now it is time to read some buttons.
In previous article we programmed LED on Nucleo board to blink. In this one I wiil try to explain in detail how I/O pins on STM32 work. This is basic tutorial on STM32 I/O ports. There are some things marked, that I have yet to check. On our board there is STM32F401RET6 microcontroller. Above is […]
As mentioned in previous article in this one I will explain how to blink LED on Nucleo F401RE using STM32CubeMX and SW4STM32. We won’t go into details about each line of code. Purpose of this tutorial is just to get LED to blink.
This is first of many upcoming tutorial articles on STM32 microcontrollers. I am learning and with them I will be sharing what I learn. In this article I will try to explain how to install System Workbench for STM32 or SW4STM32 short.
